ThermaSol TPT-NTS
Temp-Touch Plus Kit, Traditional Style
When hooked up to the ThermaSol® Steam Shower Classic, Steamshower AF or ProSeries™ residential steam bath generator, this easy-to-use soft touch switch initiates your steam bath.
Installed inside or the steam/shower enclosure, the surface-mounted TPT-NTS electronic countdown timer has a 45 minute pre-set duration, pause, and reset, and adjustable temperature settings, all with the push of a button.
Complete with matching finish NTST NoTouch™ steam head.
Available in seven decorator styles with fourteen designer finishes to match any project.
Consider the SRT handheld remote as a secondary control for on/off operation from both inside and outside the steam room/shower!
TPT Temp-Touch Control
- On/off switch
- Adjustable temperature control
- Mode indicator light
- Preset 45 minute time cycle
- Inside the steam/shower enclosure installation
- Low voltage operation
- Auto PowerFlush™ pressurized drain system activation
- Available in Contemporary, Deco, Icon, Modern, Modern Recessed, Regency and Traditional decorator styles
- Available in Polished Chrome, Antique Brass, Antique Copper, Antique Nickel, Black Nickel, Oil Rubbed Bronze, Polished Brass, Polished Copper, Polished Gold, Polished Nickel, Satin Brass, Satin Chrome, Satin Nickel and White designer finishes
NTST NoTouch™ Steam Head
- Safe operation
- Retractable when not in use
- Integral reservoir for a scented steam bath
- Available in Contemporary, Deco, Icon, Modern, Regency and Traditional decorator styles
- Available in Polished Chrome, Antique Brass, Antique Copper, Antique Nickel, Black Nickel, Oil Rubbed Bronze, Polished Brass, Polished Copper, Polished Gold, Polished Nickel, Satin Brass, Satin Chrome, Satin Nickel and White designer finishes
- TPT surface mounted control, 3-1/2” diameter
- NTST steam head, 1/2” NPT, 3-1/2” diameter, 3/4” deep, 2-1/2” rough-in cut-out
- RTV silicone sealant, .5 oz tube
- Installation and operation manual
- Limited warranty
| Model | TPT-NTS |
|---|---|
| Shipping Weight | 3 lbs. |
| DC Voltage | 5V DC |
| Steam Head Connection | 1/2" NPT |
| Control "Rough In" Cut Out | 1/2" |
| Generator Control Connection | CAN-Bus Connection |
| Generator Control Cable | 50' Data Cable |
| Width | 3-1/2" |
