Amerec DKT60/K60
DKT60/K60 Dual Control Package, Amerec
The Amerec DKT60/K60 steam shower package is designed to be installed with Amerec AK Series steam generators.
This advanced dual temperature control package consists of a KT60 and K60 control installed in tandem and provides the ability to control on/off, time, and temperature from both inside and outside the steam shower enclosure.
The DKT60/K60 dual control package features easy-to-use touch pads and a digital readout displays which navigate between room temperature and remaining time. The KT60 installs inside the shower and the K60 installs outside the shower as a convenient secondary control.
The DKT60/K60 dual digital control system is available in five designer finishes and comes complete with a matching finish Comfort Flo steam head.
SteamSaunaBath is proud to be an authorized Amerec partner and offer the full line of Amerec products and parts.
We guarantee the lowest price. If you see a lower price advertised for this item elsewhere, give us a call!
SteamSaunaBath is the bathing environment experts. We specialize in steam room and sauna design, sales, installation, maintenance, and repair services. Our half-century of hands-on experience means that we are uniquely qualified to ensure the success of your bathing space and an unparalleled steam bathing experience. To contact a SteamSaunaBath Bathing Specialist, call: (800) 707-2862.
- Time and temperature control
- Last use time and temperature memory settings
- Digital display
- Mode indicator light
- Settable 60-minute time cycle
- On/off and pause modes
- Easy-to-use, membrane touch pad
- Inside and outside the steam/shower enclosure operation
- Available in Polished Chrome, Polished Brass, Polished Nickel, Brushed Nickel, and Oil Rubbed Bronze designer finishes
- Low voltage operation
- KT60 surface-mounted control 3-1/4” square, 1-3/8” deep
- K60 surface-mounted control 3-1/4” square, 1-3/8” deep
- Comfort Flo steam head, 1/2” NPT
- Two 8-pin, 8-wire control cables, 30’ long with “snap-in” connectors
- Two control housing rough in plates and fittings
- Control mounting hardware
- Two control cable strain reliefs
- Installation and operation manual
- Limited warranty
| Model | DKT60/K60 |
|---|---|
| Shipping Weight | 5 lbs |
| DC Voltage | 5V DC |
| Control "Rough In" Cut Out | 2 Controls, 2-3/8" Diameter Each |
| Control Sensor Cable | 25', 2 Conductor, 22 AWG, Shielded Cable |
| Control Sensor "Rough In" Cut Out | 7/8" Diameter |
| Generator Control Connection | 8 Pin, Snap-In Connector |
| Generator Control Cable | 25', 8 Conductor, 28 AWG, Shielded Cable |
| Width | 2 Controls, 3-1/4" Each |
| Depth | 2 Controls, 1-3/8" Each |
| Height | 2 Controls, 3-1/4" Each |
This 8-pin, 100 foot cable is used for controls KT60 ,K60, DC60, K30, R30K which are controls built after 1996.
This Cable, Extension Adaptor FxF 8-pin is for Amerec’s Residential AK & 3K model steam bath generators.
This Cable Extension, Assy Thermistor 50’ is for use with Amerec’s Residential AK, AT, 3K & 3T and Commercial AI model steam bath generators.
This Cable, Assy Thermistor 100’ is for use with Amerec’s Residential AK, AT, 3K and 3T and Commercial AI model steam bath generators.
This Cable, Extension Adaptor FxF Thermistor/Sensor is for Amerec’s Residential AK & 3K model steam bath generators.
Stylish and attractive, this CFSH ComfortFlo steam head with Insulator has been designed to provide a safe and pleasurable steam bath experience.